July 30, 2019 at 1:45 PMadmin
Due to the electrolysis process, the floating calcium molecules get deposited on the cathode and the water returns to the process, reduction of calcium. Typical mineral scales in hot and cold domestic water distribution systems and also in evaporative cooling systems are largely calcium carbonate. [More]

Posted in: Installation | Photo Gallery | Write ups | Application | Bio-fouling | cooling tower | General Information | Tiaano

Tags: , , , , ,

Chemical Free Self-Cleaning Electrolytic Scale Remover

July 29, 2019 at 10:39 AMadmin
Electrochemical technology, wherein ElSr attains the chemical decomposition by electrical current. The treatment system to provide controlled electrolysis in a reaction chamber to… [More]


July 26, 2019 at 3:11 PMadmin
Savings minimum 20% of reject flow. 100% of blow down can be used for Gardening without further treatment as chemical contamination is not there in the blow down. Flow rate capacity (max.) of an ElSr reactor is one M3 / Hr. Tiaano ElSr-RO an electrolytic scale remover a single system producing strong oxidant, it can be taken care of protection on… [More]

Electrolytic Disinfection (ElDs-Cl2) cum Scale Separation Unit

July 24, 2019 at 6:33 PMadmin
The water is not soft at the outlet of the ElDs-Cl2, but the scale forming ions has been reduced to a level that prevents the precipitation in Water distribution system. ElDs-Cl2 will precipitate all scale forming ions, not just magnesium and calcium but other ions that are susceptible to dropping out the liquid at high pH Viz., Silica, Ferum, and Manganese etc. [More]

Posted in: Agriculture | Broucher | Green House | Write ups | Application | Bio-fouling | General Information | Introduction | OEM | Tiaano

Tags: , , , , , , , , ,

Chemical free Electrolytic Scale Remover (ElSr) and its Application

July 22, 2019 at 6:15 PMadmin
It separates/observe the scale by using the principle of electrolysis without adding chemicals (zero chemical) and its below image is self-explanatory. [More]

Prevent the corrosion of Boilers by Using Tiaano’s Chemical Free Electrolytic Scale Remover

July 10, 2019 at 10:35 AMadmin
Boiler water pH should be between 8.5 to 9.5, if failed to maintain the pH level, then the boiler water will start to make corrosion in the pipe lines of the boiler equipments. [More]

Innovative Product for (Portable Electrolytic) Scale Remover without chemical

July 1, 2019 at 6:43 PMadmin
The feed water should not be purified. The water should have minimum hardness and electrical conductivity, which will be speed up the process of electrolysis, resulting, effective scale separation. However, if the rust condition in the system is very serious, our ElSr can be used for removing rust also. [More]

Posted in: Broucher | Installation | Photo Gallery | Write ups | Application | Bio-fouling | cooling tower | General Information | Introduction | OEM | Tiaano

Tags: , , , , , , , ,