Electrochemical technology of Tiaano’s Chemical free Self-cleaning Electrolytic Scale Remover

February 24, 2020 at 10:42 AMadmin
Zero chemical dozing: offered ElSr will eliminate the need of any dosing chemicals to treat the cooling water and substantially reduce the Bleed off (blow down) requirement by increasing Cycle of Concentration, thereby saving large quantity of make-up water. [More]

Chemical free Electrolytic Scale Remover -A Non-Chemical Water treatment System for Cooling Tower

January 29, 2020 at 10:32 AMadmin
Also, the chlorine produced by our anode helps to prevent the bacterial growth, algae formation, colony formation etc. The Electrolytic Scale Removal system to be capable of working in a maximum temperature of ~50°C. [More]

Additional Advantages of Tiaano’ s Chemical free Self- Cleaning Electrolytic Scale Remover

January 4, 2020 at 2:43 PMadmin
Save water by using the least possible makeup water by effectively increasing the cycle of concentration. [More]

Recoating of Anodes for Chemical Free Electrolytic Scale Remover

November 20, 2019 at 11:58 AMadmin
Tiaano is pioneer in Manufacturing of Anodes and with the same so many equipment's developed. [More]

MMO Coated Plates for the application of Electrochemical Water Treatment

November 11, 2019 at 3:10 PMadmin
There is a MMO (Mixed Metal Oxide) coating over the Titanium becomes Anode, which will be called as MMO coated Plates and used for Electro Chemical water treatment. [More]

Posted in: Anode | ElectroChemistry | Photo Gallery | Write ups | Application | cooling tower | General Information | Tiaano

Tags: , , , , , , , ,

Images of Tiaano’s Chemical Free Electrolytic Scale Remover at Bangalore, India.

November 4, 2019 at 10:41 AMadmin
Tiaano installed their Chemical Free Electrolytic Scale Remover (ElSr) at Bangalore for the larger capacity cooling tower of 4800 TR (4 X 1200 TR) for HVAC application. From the stage of installation, our ElSr system is performing well. [More]

Chemical Free Self-cleaning Electrolytic Scale Remover for Swimming Pool Water Treatment

October 23, 2019 at 6:33 PMadmin
The pool water should not be softened. If it is softened, there is no calcium ions or magnesium in the water, the hardness and electrical conductivity are so low that the process of electrolysis will be slow, resulting in poor effect. [More]

Chemical Free Self-Cleaning Electrolytic Scale Remover – System operation

October 18, 2019 at 5:45 PMadmin
The treatment system must operate using the electrolysis principle with the electro chemical reactor, consisting electrolyzer of anode and cathodes. Water to flow through the reactor between the cathode and anode, continuously for electrical current to flow and cause the dissociation of the salts in the water into ions, should also precipitate all scale forming ions, not just magnesium and calcium but other ions that are susceptible to dropping out of the liquid at high pH viz., Silica, Ferum, Manganese etc. [More]

What range of TDS water should have container water?

October 8, 2019 at 10:44 AMadmin
TDS should have minimum 350 ppm in the feed water. [More]

Posted in: Anode | Cathode | Photo Gallery | FAQ | General Information | Tiaano

Tags: , , , , , , , , , , ,

CHEMICAL FREE ELECTROLYTIC SCALE REMOVER FOR DEMONSTRATION

October 5, 2019 at 5:01 PMadmin
Tiaano launched transparent demo ElSr to see the electrolysis externally. When passing DC current (12 V adapter) across the anode & cathode electrolysis will be happened & do separate the scale. [More]

Posted in: Anode | Cathode | Dis-infection | Photo Gallery | Write ups | General Information | Tiaano | Demo Kit

Tags: , , , , , , , , , , , , , ,