What are reflective parameters in the process after installation of ElSr

August 26, 2019 at 11:27 AMadmin
lSr system making the conductive salts in the water gets precipitated and ionized. So there may not be a difference, but the TDS will be ineffective. Due to this scale won’t be formed in the downstream water circuit. So it can’t be quantified. [More]

What is the quality of feed water inlet to Chemical Free Electrolytic scale Remover (ElSr)?

August 24, 2019 at 2:36 PMadmin
Make up water should not be softened. If it is softened there is no calcium or magnesium ions in the system, so hardness and electrical conductivity are so slow that the process of electrolysis will be slow and resulting in poor effect. [More]

General Information about Tiaano’s Chemical Free Electrolytic Scale Remover

August 23, 2019 at 5:09 PMadmin
Tiaano incepted on 1992, and installed more than 5000 numbers of electrolytic water treatment system throughout 63 countries. Tiaano, India design and produce the Titanium reactor by “Make in India” concept. [More]

Effect of Condenser when using Tiaano’s Chemical Free Electrolytic Scale Remover

August 22, 2019 at 12:34 PMadmin
The conditions of heat exchanger tubes before and after installation of “ElSr.” Previously , scale was adhering as much as heat exchanger tubes were blocked, but about half a year after installation , the adhesion status was significantly improved. [More]

TIAANO’S CHEMICAL FREE ELECTROLYTIC SCALE REMOVER IN DAIRY INDUSTRIES.

August 9, 2019 at 10:33 AMadmin
Due to the recirculation of water in the process, the mineral (Conductive Salts) which is found in the water causes more problems (Scaling) in their cooling water circuits. In order to resolve this problem, one of our customer in Chennai, using Tiaano’s Chemical Free Electrolytic Scale Remover (ElSr) [More]