Chemical Free Self-Cleaning Electrolytic Scale Remover – System operation

October 18, 2019 at 5:45 PMadmin
The treatment system must operate using the electrolysis principle with the electro chemical reactor, consisting electrolyzer of anode and cathodes. Water to flow through the reactor between the cathode and anode, continuously for electrical current to flow and cause the dissociation of the salts in the water into ions, should also precipitate all scale forming ions, not just magnesium and calcium but other ions that are susceptible to dropping out of the liquid at high pH viz., Silica, Ferum, Manganese etc. [More]

Our Newly designed Chemical Free self-cleaning Electrolytic Scale Remover for cooling tower water treatment

October 16, 2019 at 11:33 AMadmin
Tiaano incepted on 1992, installed over 5000 electrochemical water treatment systems in 63 countries. Chemical free self-cleaning (Fully Automatic) Electrolytic Scale Remover, our new innovative product is an online treatment system, widely accepted product designed for the application of cooling tower water treatment. [More]

Special Characteristics of Tiaano’s Chemical Free Electrolytic Scale Remover used for Cooling Tower Water Treatment System

October 14, 2019 at 4:40 PMadmin
Indian engineering & production follows science & Technology of Israel. [More]

Which parameters to be considered to take blow down? (TDS or conductivity)?

October 12, 2019 at 3:37 PMadmin
Normally in chemical dozing they take blow down when conductivity reaching 2000 μs / cm. But when using ElSr, our recommendation to blow down the water when the conductivity reaching between 4000 &4500 μs / cm. [More]

Tiaano’s Chemical Free Electrolytic Scale Remover Installation in Textile Mills for the Application of Humidification Spray Chamber

October 9, 2019 at 5:35 PMadmin
ue to the recirculation of water in the process, all the conductive salts (scale) deposited in the Pipe lines & the Spray nozzles. In due course the pipelines are getting deteriorated. [More]

What range of TDS water should have container water?

October 8, 2019 at 10:44 AMadmin
TDS should have minimum 350 ppm in the feed water. [More]

Posted in: Anode | Cathode | Photo Gallery | FAQ | General Information | Tiaano

Tags: , , , , , , , , , , ,

CHEMICAL FREE ELECTROLYTIC SCALE REMOVER FOR DEMONSTRATION

October 5, 2019 at 5:01 PMadmin
Tiaano launched transparent demo ElSr to see the electrolysis externally. When passing DC current (12 V adapter) across the anode & cathode electrolysis will be happened & do separate the scale. [More]

Posted in: Anode | Cathode | Dis-infection | Photo Gallery | Write ups | General Information | Tiaano | Demo Kit

Tags: , , , , , , , , , , , , , ,

TECHNICAL AND CHEMICAL PROCESS OF TIAANO’S CHEMICAL FREE ELECTROLYTIC SCALE REMOVER

October 4, 2019 at 4:29 PMadmin
By applying electrical power between anode and cathode, the chemical reaction is activated and electrolysis process takes place. Water from the cooling tower pond is circulated through the electrolysis scale remover reactor. [More]

Posted in: Anode | Broucher | Cathode | cooling tower | General Information | Self-Cleaning System | Tiaano

Tags: , , , , , , , , , , , , ,

A Project Profile for Tiaano’s Chemical Free Electrolytic Scale Remover

September 28, 2019 at 6:29 PMadmin
To maintain the Delta-T, they used the traditional anti-scaling dozing. Due to the scarcity of water, blow down was restricted. Now after using ‘Tiaano ElSr – Ct’ series, blow down was restricted. [More]

How do we determine the chlorine (Sodium Hypochlorite) generation and frequency?

September 25, 2019 at 6:23 PMadmin
Chlorine will be generated continuously, which will vary according to the sodium chloride available in the application like drinking water, sewage water, etc. [More]

Posted in: Anode | Cathode | cooling tower | FAQ | Tiaano

Tags: , , , , , , , , , ,