ELECTROLYTIC SCALE REMOVER 100% CHEMICAL FREE

Frequently Asked Questions (FAQ)

1. Will the TDS/Hardness reduce by using Chemical Free Electrolytic Scale Remover (ElSr)? If so, how much?

Ans. There may not be difference in TDS/Hardness before and after the ElSr. Also ElSr system making the conductive salts in the water gets precipitated and ionized. So there may not be a difference, but the TDS will be ineffective. Due to this scale won’t be formed in the downstream water circuit. So it can’t be quantified.

2. What are reflective parameters in the process after installation of ElSr?

Ans. Conductivity, Change in Temperature and Approach Value

3. What is the interval of cleaning the Electrolyzer/Reactor and how?                                                              

Ans. The recommended interval of Cleaning is once in a month.  It may vary depends the quality of water. 

During cleaning the Copper Bar fixed above the Anode to be removed.  Further 6 x Bolts to be removed to take out the top flange along with Anode.  Once it is removed the cathode shall be brushed and flushed out with water.  So that complete scale will be coming out.

4. What is BOD/COD?

Ans. BOD means Biological Oxygen Demand and COD means Chemical Oxygen Demand

5. What is COC? How can it related with the Electrolytic Scale Remover?

Ans. COC means Cycle of Concentration.  Normally one COC will take 2-3 Hrs. to complete, since there is a salt content in the water.  Once the ElSr is installed, over a period of time this COC will be improved and it will take lesser time and also the electricity will be saved. Number of COC will be increased.