Electrolytic Scale Remover for Swimming Pool Water Treatment

July 22, 2021 at 11:30 AMadmin

In most of the countries, tap water with hardness levels of 400-800 ppm. High calcium levels can lead to scaling, especially if pH levels are allowed to rise, which produces whitish scale at the waterline, inside pipes or all over the pool.

What causes scale in pools?

The most common cause of calcium scale in pools is the result of high calcium hardness, over 400 ppm, yet is triggered by high Alkalinity, high pH and high water temperatures. Some will tell you to drain the pool if over 400 ppm, but not necessarily!

Calcium carbonate scale can form along the waterline of the pool as evaporation increases during the summer. Scale itself is a white translucent color, but is often mixed with dirt and algae to appear darker.

Chemical Free Electrolytic Scale Remover

We Tiaano introduced a chemical free self-cleaning electrolytic Scale Remover (ElSr) for swimming pool water treatment, it produce oxidant in the water. Oxidant miligate the corrosion, bio-fouling, micro-organism growth, Scaling & spread of airborne bacteria.

Passing DC current from negative element to the positive element, it creates high pH in the vicinity of the negative. High pH causes scale to be deposited in the reactor. The water is not soft at the outlet of the ElSr, but the scale forming ions has been reduced to a level that prevents the precipitation in water distribution system.

Water Requirements:

The pool water should not be softened. If it is softened, there is no calcium ions or magnesium in the water, the hardness and electrical conductivity are so low that the process of electrolysis will be slow, resulting in poor effect.

TDS content in the water should be minimum 800 ppm, otherwise we recommended to add 5 gram sodium hypochlorite per liter of water. Then the result will be obvious.

Benefits:

ü  Made your swimming pool safe.

ü  100% no Chemicals.

ü  No need of softeners.

ü  Prevent Micro-organism growth like algae & slime.

ü  Scale precipitation in pools water circuit.

 ü  Prevent corrosion , as ElSr creates alkaline pH between 7.3 to 8.0

 Benefits of using Scale Free Systems 

What is the determining factor of value in your facility with a water treatment program? Is it the cost of implementation, water cost, energy cost, maintenance, equipment depreciation, capital expenditures, or safety? Of course one could make an argument for each of these. To achieve all of these, one needs to have good control over the system that runs in the facility. The Scale Remover System is the only non-chemical system on the market that can help you reach your goals in all of these areas regardless of the makeup water being used in the facility. If this were true of other systems, they would not limit their applications to only a specific range of existing conditions.

 

Imagine never having to worry about federal/state environmental regulations, the handling/storage of hazardous chemical onsite, the constant battle of monitoring your heat exchange systems to balance the water chemistry, the recurring expense of chemicals, and the annual acid cleaning and rodding of tube... just to name a few!



ELSr

Comments are closed