ELECTROLYTIC SCALE REMOVER USING ELECTROLYSIS

November 23, 2021 at 2:27 PMadmin

Scale Deposit over Cathode due to the Electrolysis inside the ElSr Reactor installed in Cooling Tower Recirculation System

There are standard normal, rate of deposition in Cooling water circuit and the parameters like, pH by weight of 6.3% , Loss of Ignition by weight of 22.02%, Fe as (Fe2O3) by weight of 57.2%, Ca as CaCO3 by weight of 4.91%, Phosphate as PO4 by weight of 2.52% and Silica & insolvable by weight of 13.35% have been observed.

The above deposit result indicates that Cooler was rusted due to formation of corrosion products (Rust, Fe2O3).  Also there is a biological bacterial growth (Bio fouling) due to regular Cooling Water System. 

To resolve all these, Bio fouling (Algae growth/ Bacterial growth), Corrosion and fouling (Scaling) issues, Tiaano innovated Skid Mounted Chemical Free Electrolytic Scale Remover (ElSr). Since, there is an in situ Chlorine Generation, which can disinfect the bio fouling.  Also the cathode can attract all the conductive salts which can be removed by the wiper mechanism and the same will be caught by the media filter. Hence the treated water is scale free. The attached image for accumulation of scale over the cathode and anode without scale are  self-explanatory.

Comments are closed