Portable Electrolytic Scale remover – A New Technology in Electrolytic Process

August 2, 2018 at 11:34 AMadmin

Tiaano, India an ‘ISO 9001-2015’ and ‘CE mark’ certified company, incepted on 1992 with well-equipped in-plant facilities and qualified engineers for designing, manufacturing, testing, supplying & installing the electro chemical water treatment Equipments.  

In order to overcome the limitations of conventional cooling water treatment, Tiaano developed a new concept in this field, a removal of scale (free calcium carbonate and magnesium carbonate) by electrolytic process, by using Platinum group precious metal oxide activated titanium electrolysers. 



In the Cooling towers or the cooling system, the common (traditional) method of treatment for these problems entailed the use of chemicals and unguaranteed results.  For the small quantity of water recirculation in the application of humidification, Tiaano introduce Dip type Electrolytic Scale remover. It produce Oxidants and  prevents the corrosion, Bio-fouling, Scaling, Micro-organism growth and spread of airborne bacteria.  Passing DC Current from positive element to the negative element, it creates high ph in the vicinity of the negative. High PH Causes Scale to be deposited in the Mesh type Cathode.

Water requirements:

•      The feed water should not be purified or softened one. If it is softened, the hardness and  electrical conductivity will be too low, it leads the process of electrolysis will be slow, resulting,poor effect in separation of scale. However, if the rust condition in the system is very serious, our ElSr can be used for removing rust also. 

•      Quality of feed Water should have the electrical conductivity more than 500µs/cm and the total hardness should be more than 300mg/L. Then the effect of treatment will be obvious. 


 Tiaano’s Portable Electrolytic Scale remover  is an independent equipment, getting immersed inside the water tank separately out of the  cooling water circuit.  Water from the cooling tower pond is continuously circulated through the ‘Tiaano-ElSr’.Process of scale removal is getting carried out, when the ‘Tiaano-ElSr’ is connected to power and water flow through it. ‘Tiaano-ElSr’ could be operated manually and maintained manually.

•          Reactor is immersed in a tank.

•          Electrolyser / cell in vertical.

•          Electrolyzer made of titanium substrate with a very durable catalytic metallic oxide coating,   suitable for brine temperature between 5 °C to 50°C

•      Based on the quality of water and salt input, the scale will get deposited  on cathode, it will   be monitored on regular basis and cleaned as and when required. 

•         Made from titanium substrate, plate material as per ASTM B 265  & 348 Gr.2

•         Platinum group precious metal MMO coating on anode surface for Chlorine production. 

Benefits of using Tiaano’s Portable Electrolytic Scale Remover :

•          100 % Saving on Chemicals.

•          60% to 70 % saving on blow down water.

•          10% to 50% savings on daily labour.

•          20% to 30% savings on water.

•          02% to 30% savings on Chilling energy.

•          02% to  20% savings on boiler energy.

•          05% to 15% savings on cooling fan.

•          Prevent scale precipitation in CT circuit.

•          Control  the formation of Bacteria.

•          Control the algae and Slime.

•          Prevent the corrosion.





Posted in: Installation | Application | cooling tower | General Information | Hot Water Treatment | Tiaano


Comments are closed