SCALE REMOVER FOR HUMIDIFICATION SPRAY CHAMBER

March 19, 2022 at 12:43 PMadmin

 

The humidification spray chamber is mostly used in the Textile Yarn Threading plant.  The efficiency of the humidifier depends the ambient temperature; during hot climate there may be little temperature change(Delta T) within the hygroscopic element and negligible condensation. Under optimum conditions, however, an inspired air humidity of over 25 g m−3 may be achieved with some types of HEAT AND MOISTURE EXCHAGE (HME). At high minute volumes the HME is less efficient and a general problem with HMEs is that secretions may be deposited on the spray nozzle. The continuous recirculation and spraying result in dirty water building up in the sump. In order to reduce the incidence of infection to occupants and fouling of the nozzle, water treatment with biocides and softening of the water supply are required. The sump is complete with strainers in a position that allows easy access for cleaning. The attached installed image in one of the Textile Plant Humidification Spray Chamber to remove the scale by using manual cleaning type of ElSR. The below image is self explanatory.

 

 

Comments are closed