Normally in traditional chlorine dosing there is a danger of excess chlorine which causes irritation and itching and eye burning in particular in swimming pool application. How this problem is over come in present system

October 24, 2019 at 5:27 PMadmin
For the application of swimming pool, chlorine production is auto controlled for the maximum of 5 ppm. [More]

Which parameters to be considered to take blow down? (TDS or conductivity)?

October 12, 2019 at 3:37 PMadmin
Normally in chemical dozing they take blow down when conductivity reaching 2000 μs / cm. But when using ElSr, our recommendation to blow down the water when the conductivity reaching between 4000 &4500 μs / cm. [More]

Does ElSr system take care of BOD & COD?

October 11, 2019 at 4:22 PMadmin
Our system can do ionization, precipitation and chlorination. Because of Ionization in ElSr, scale precipitation occurs; once the scale is precipitated, it never adheres to the Condensers / cooling tower Water distribution system. Chlorine (Sodium hypochlorite) production helps to prevent the growth of bacteria and algae. [More]

Posted in: FAQ

Tags:

What range of TDS water should have container water?

October 8, 2019 at 10:44 AMadmin
TDS should have minimum 350 ppm in the feed water. [More]

Posted in: Anode | Cathode | Photo Gallery | FAQ | General Information | Tiaano

Tags: , , , , , , , , , , ,

How do we determine the chlorine (Sodium Hypochlorite) generation and frequency?

September 25, 2019 at 6:23 PMadmin
Chlorine will be generated continuously, which will vary according to the sodium chloride available in the application like drinking water, sewage water, etc. [More]

Posted in: Anode | Cathode | cooling tower | FAQ | Tiaano

Tags: , , , , , , , , , ,

How we ensure 20% of water feed through Tiaano ElSr?

September 14, 2019 at 12:29 PMadmin
20% of the water in circulation from the main stream will be tapped to our ElSr through non-destructive ultrasonic flow meter as an installation tool. By using this tool, control valve shall be adjusted [More]

Posted in: Installation | Application | Case Study | cooling tower | FAQ | General Information | Tiaano

Tags: , , , , , , , ,

What should be the minimum required electrical conductivity of feed water and maximum allowable electrical conductivity of treated water of Electrolytic Scale Remover

September 10, 2019 at 5:58 PMadmin
Minimum required Electrical conductivity should be 500 Micro Siemens/cm. And the allowable conductivity for blow down is till 4500 Micro Siemens/cm. [More]

Posted in: FAQ | Tiaano

Tags: , , , , , , , , ,

Is the ElSr is suitable for STP water application

September 3, 2019 at 6:04 PMadmin
TR means Tons of Refrigeration, which is equivalent to 13 LPM. [More]

Posted in: FAQ | STP Treated water | Tiaano

Tags: , , , , , , , ,

What is COC? How can it related with the Electrolytic Scale Remover(ElSr

August 28, 2019 at 3:26 PMadmin
COC means Cycle of Concentration. Normally one COC will take 2-3 Hrs. to complete, since there is a salt content in the water. Once the ElSr is installed, over a period of time this COC will be improved and it will take lesser time and also the electricity will be saved. [More]

Posted in: Broucher | Dairy Industry | Dis-infection | HVAC | Bio-fouling | cooling tower | FAQ | General Information | Self-Cleaning System | STP Treated water | Tiaano

Tags: , , , , , , , , ,

What are reflective parameters in the process after installation of ElSr

August 26, 2019 at 11:27 AMadmin
lSr system making the conductive salts in the water gets precipitated and ionized. So there may not be a difference, but the TDS will be ineffective. Due to this scale won’t be formed in the downstream water circuit. So it can’t be quantified. [More]