ELECTROLYTIC SCALE REMOVER 100% CHEMICAL FREE

ElSr- Tiaano systems use electrolysis technology to condition water: Salts and carbonates that normally accumulate on the heat transfer surfaces in the cooling system are deposited in the reactor before they get a change to clog the pipes. electro- chlorination and electro-oxidation destroy organic matter that causes micro and macro fouling, to provide superior water conditioning results in comparison to chemical treatment. ElSr-Tiaano’s self cleaning mechanism makes the system virtually maintenance free.Installed at various locatıons worldwide, systems provide superior water conditioning of cooling towers. The systems control micro and macro fouling, scaling and corrosion, while eliminating or minimizing the need for chemicals. Thanks to ElSr-Tiaano, towers can work at much higher conductivity saving up to 80% of the blow down water. As no chemicals are added in most cases, blow down water can be reused for general purpose area cleaning, gardening, fire tanks allowing up to 80% ... [More]

state of art scale remover, produces oxidants in the water. Prevents, inhibits corrosion, Bio-fouling & scaling, Micro-organism growth and spread of airborne bacteria. [More]

Dip type scale remover is cost effective and moveable. It is a plug and play system. Dip inside the reservoir. Scale deposits are view-through. Periodical cleaning is easy go. Lay man can operate the ElSr system. Produce maximum of 0.4 ppm Cl2. Chlorination & oxidation takes place in-situ, maintain uniform mix of disinfectant in water. [More]

Scale available in the Cooling tower reservoir is composed of sodium and chloride. When DC is passed through the reactor to the electrolyte (water), the chlorides will disassociate and form chlorine. [More]

ElSr is an independent equipment, getting installed separately out of the Heat exchanger’s cooling water circuit. Water from the cooling tower reservoir is continuously circulated through the ElSr via circulation pump. Process of scale remover is getting carried out, when the ElSr is connected to power and water flow through it. Its construction is purely by using corrosion resistant materials of GRP, UPVC & Platinum group precious metal oxide coated titanium. [More]

Water quality meets site-specific standards (may include conductivity, pH, hardness, alkalinity, silica, chloride anions, salt anions, sulfate anions, phosphate, copper, iron, and biological). [More]

Zero chemical dozing: offered ElSr will eliminate the need of any dosing chemicals to treat the cooling water and substantially reduce the Bleed off (blow down) requirement by increasing Cycle of Concentration, thereby saving large quantity of make-up water. [More]

Also, the chlorine produced by our anode helps to prevent the bacterial growth, algae formation, colony formation etc. The Electrolytic Scale Removal system to be capable of working in a maximum temperature of ~50°C. [More]

By this tool, the sedimented scale on the reactor wall which is absorbed by cathode is cleaned by friendly mode and it is made out of Steel. [More]

Blow down will be carried out on 8500 µS. [More]