Frequently Asked Questions (FAQ)

October 12, 2019 at 3:37 PMadmin
Normally in chemical dozing they take blow down when conductivity reaching 2000 μs / cm. But when using ElSr, our recommendation to blow down the water when the conductivity reaching between 4000 &4500 μs / cm. [More]


October 10, 2019 at 5:56 PMadmin
During this 650 Hrs. treatment, the ElSr system protects corrosion on the wall of the HWCS Tank. Also removed the existing scale (fouling) on the Heater coil. Hence the Tiaano’s ElSr system can separates the scale accumulated on the accessories like Heater, Condenser, Hot water circuits and makes corrosion free. [More]

Chemical Free Electrolytic Scale Remover with Different Application

September 23, 2019 at 6:39 PMadmin
Chemical free Electrolytic Scale Remover have been working by using fresh water / treated STP water / Bore water / Hot water as make-up. [More]

Major Benefits of Tiaano’s Chemical Free Electrolytic Scale Remover (ElSr)

September 9, 2019 at 6:37 PMadmin
80% savings on blow down water, [More]

Tiaano’s Chemical Free Electrolytic Scale Remover for Natural Draft Cooling Tower

August 27, 2019 at 3:48 PMadmin
‘Tiaano ElSr-ND’ is an online treatment system, widely accepted product design for large capacity cooling towers in Power station, Refinery etc. [More]

Frequently Asked Questions (FAQ)

August 26, 2019 at 11:27 AMadmin
lSr system making the conductive salts in the water gets precipitated and ionized. So there may not be a difference, but the TDS will be ineffective. Due to this scale won’t be formed in the downstream water circuit. So it can’t be quantified. [More]

General Information about Tiaano’s Chemical Free Electrolytic Scale Remover

August 23, 2019 at 5:09 PMadmin
Tiaano incepted on 1992, and installed more than 5000 numbers of electrolytic water treatment system throughout 63 countries. Tiaano, India design and produce the Titanium reactor by “Make in India” concept. [More]

Chemical free Electrolytic Scale Remover (ElSr) and its Application

July 22, 2019 at 6:15 PMadmin
It separates/observe the scale by using the principle of electrolysis without adding chemicals (zero chemical) and its below image is self-explanatory. [More]

Prevent the corrosion of Boilers by Using Tiaano’s Chemical Free Electrolytic Scale Remover

July 10, 2019 at 10:35 AMadmin
Boiler water pH should be between 8.5 to 9.5, if failed to maintain the pH level, then the boiler water will start to make corrosion in the pipe lines of the boiler equipments. [More]

Static Charge Protection in the treated water when using Chemical Free Electrolytic Scale Remover

May 15, 2019 at 12:32 PMadmin
water will be delivered with zero static charge of Water/any media [More]

Posted in: cooling tower | FAQ | General Information | Hot Water Treatment | Tiaano

Tags: , , , , , , ,